Merge branch 'doc/update_release_notes' into 'master'

Update release notes

See merge request detectors/pycalibration!770

docs/source/changelog.rst

 Release Notes
 =============
 
+3.7.5
+-----
+
+16-11-2022
+
+- [JUNGFRAU] Fix index location for ROI instrument output https://git.xfel.eu/detectors/pycalibration/-/merge_requests/765
+
+3.7.4
+-----
+
+15-11-2022
+
+- [Jungfrau] Only emit a warning if all sequences of a job are empty
+- [Jungfrau] Fix storing multiple ROIs for a single module
+- [Jungfrau] Replicate a raw dataset in processed data for legacy analysis code
+
+3.7.3
+-----
+
+10-11-2022
+
+- [DataFile] Add support for older INDEX and METADATA versions.
+- [LPD] Fix histogram plotting if selected cell's data is identical for trains.
+- [Jungfrau] Avoid unclear error messages when the run has no trains.
+- [AGIPD] Change notebook-default setting of max-task-per-worker to 1.
+- [REMI] Allow pulse separation in REMI/DLD reconstruction to ignore FEL pulses.
+- [webservice] Fix timestamps in the overview page.
+- [Webservice] Check run type more directly in myMdC response.
+
+3.7.2
+-----
+
+28-10-2022
+
+- [Jungfrau] Add support for strixel sensors
+- [Jungfrau] Shorter summary notebook for darks by default
+- [Jungfrau] Always align corrected data properly
+- [Jungfrau] Harden against 0 adc data in dark characterization
+- [REMI] Add support for quad nodes and various pulse separation improvements
+- [AGIPD] Allow manual photon energy input for photonization and add consistency plots
+- Grant priority partitions for set-up time
+
+3.7.1
+-----
+
+14-10-2022
+
+- [EPIX100] Add Common mode corrections to dark characterization
+- [EPIX100] Use a single value for temperature
+- [JUNGFRAU] Fix bad pixel masking
+- [JUNGFRAU] Limit number of plotted trains to 500 during corrections
+- [AGIPD] Don't fail when there are no trains in sequence file
+- [REMI] Use DataFile API and support asymmetric pump-probe patterns
+- Skip corrections for runs which match specific types
+
+3.7.0
+-----
+
+07-09-2022
+
+- [JUNGFRAU] Mask double sized pixels for Jungfrau https://git.xfel.eu/detectors/pycalibration/-/merge_requests/689
+- [LPD] Storing retrieved calibration constants in calibration_metadata.yml.
+- Storing the running logs in the report folder path instead of a `temp` folder wherever the processing ran from.
+- Selecting partitions based on beamtime dates. https://git.xfel.eu/detectors/pycalibration/-/merge_requests/725
+- Creation time is not read from myMDC anymore.
+
+3.6.4
+-----
+
+20-08-2022
+
+- [AGIPD] Significant improvements to AGIPG LitFrameFinder implementation, including offline support.
+- [AGIPD] Fix misalignment of data and gain/mask when common mode is used with manual pulse slicing.
+
+3.6.3
+-----
+
+23-08-2022
+
+- [AGIPD] litframe finder configs in update_config https://git.xfel.eu/detectors/pycalibration/-/merge_requests/723
+
+3.6.2
+-----
+
+15-08-2022
+
+- [EPIX100][Jungfrau][pnCCD] Retrieve constants precorrection notebooks.
+- [AGIPD] skip sanitization https://git.xfel.eu/detectors/pycalibration/-/merge_requests/654
+- [AGIPD] New PC notebook https://git.xfel.eu/detectors/pycalibration/-/merge_requests/604
+- [JUNGFRAU] Allow selecting ROIs to save 1D projections  https://git.xfel.eu/detectors/pycalibration/-/merge_requests/699
+3.6.1
+-----
+
+26-07-2022
+
+- [GOTTHARD2] Correction and Dark notebooks. https://git.xfel.eu/detectors/pycalibration/-/merge_requests/658, https://git.xfel.eu/detectors/pycalibration/-/merge_requests/684, https://git.xfel.eu/detectors/pycalibration/-/merge_requests/707
+- pin `xarray` to 2022.3.0 https://git.xfel.eu/detectors/pycalibration/-/merge_requests/706
+3.6.0
+-----
+
+20-07-2022
+
+- [LPD][Dark] Save LPD bad pixel dark data as uint32, not float64. https://git.xfel.eu/detectors/pycalibration/-/merge_requests/698
+- [LPD][Correct] Add option to disable Oauth when using CalCat proxy. https://git.xfel.eu/detectors/pycalibration/-/merge_requests/681
+- [AGIPD][LPD][DSSC][DARK] Avoid printing errors for expected missing constant files. https://git.xfel.eu/detectors/pycalibration/-/merge_requests/664
+- [TESTs] Refactor and split `AGIPDCtrl` methods (old and new RAW data versions.) and add unit tests https://git.xfel.eu/detectors/pycalibration/-/merge_requests/651, https://git.xfel.eu/detectors/pycalibration/-/merge_requests/646
+- [Webservice] Monitor SLURM jobs in a separate process. https://git.xfel.eu/detectors/pycalibration/-/merge_requests/668
+- [Webservice] Restructure the SLURM database to give more meaningful success/failure information. https://git.xfel.eu/detectors/pycalibration/-/merge_requests/683
+- [XFEL-CALIBRATE] Recreate environments on demand for xfel-calibrate-repeat. https://git.xfel.eu/detectors/pycalibration/-/merge_requests/660
+- Upgrade the Jupyter packages to the latest version. https://git.xfel.eu/detectors/pycalibration/-/merge_requests/697/diffs
+- Update Extra-data to 1.12: https://git.xfel.eu/detectors/pycalibration/-/merge_requests/693
+  - [EXtra-data] Disable `_use_voview` to be able to use `.files` or avoid using `.files` https://git.xfel.eu/detectors/pycalibration/-/merge_requests/682, https://git.xfel.eu/detectors/pycalibration/-/merge_requests/688
+
+
 3.5.5
 -----